|
|
The Precision DMX is the world’s smallest DMX controllable theatrical floodlight.
Skulltronix has teamed with
Gantom Lighting and Controls to bring you a pre-packaged pair of Precision DMX lights including all the proper cables and
power supplies to work with your Skulltronix animatronic products. Every pre-recorded or custom animation
routine from Skulltronix has all of the lighting commands built into it to fully use the features of the Precision DMX lights.
This RGB fixture is smaller than a
fist yet packs comparable punch to traditional fixtures several times its size!
No other fixture on the market comes
close to the compactness of this fixture with all the internal circuitry and intelligence built in.
The Precision DMX
is a microprocessor based intelligent lighting fixture that can be controlled to generate a wide range of vivid colors.
Features
- Full color control via DMX512 or free DMX Programmer iOS app
- 3 channel DMX control
- Built-in functions: flicker, strobe, blink, fade, color change, master dimming, color macro
- Standalone mode allows set and forget operation without DMX signal (requires free DMX Programmer iOS app)
- DMX address and configuration stored in memory
- Low voltage and minimal heat for improved safety over incandescent sources
- Internal constant current driver gives highly efficient and consistent output
- Minimal maintenance required with over 50,000 hour lamp life
- Indoor and outdoor use
Applications
- Themed entertainment (dark rides, Halloween attractions, bars, nightclubs, casinos)
- Theater and stage accent lighting
- Mobile displays
- Floral centerpieces
- Retail spaces
- Architectural accent lighting
- General purpose accent lighting
- Props and animatronics
- Special effects lighting
- Event lighting
Specifications
Input |
12V |
Power Rating |
3.793W (12V @ 316mA) |
LED |
Edison Edixeon RGB 3W |
Lamp Life |
50,000 hours |
Available Colors |
RGB |
Dimming |
DMX512 |
Lens Angle |
21° |
Beam Edge |
Soft |
Dimensions |
35mm (1.4?)Ø x 52mm (2.0?) length |
Lead Wire Length |
360mm (14.2?) |
Power connector: |
2.1mm DC jack with screw terminal adapter standard* |
Signal connector: |
3.5mm (1/8?) TRS jack with screw terminal adapter standard* |
Exterior Finish |
Black anodized aluminum |
IP Rating |
IP65 |
Certification |
UL |
*Outdoor rated and specialty connectors available.
Please inquire.
Downloads
Product Details
SKU: PR41
Output: All LEDs On
Total Lumen Output: 82.0 Lumens
Total Power: 3.793 W
Distance |
Center Beam
|
Beam Width |
1.0m (3.3ft) |
353lx (32.7fc) |
0.4m (1.2ft) |
2.0m (6.6ft) |
86lx (8.0fc) |
0.7m (2.4ft) |
3.0m (9.8ft) |
36lx (3.3fc) |
1.1m (3.6ft) |
DMX Channel Descriptions
Channel |
Level |
Description |
Ch 1-3 |
RGB Level |
0-255 |
Controls RGB levels |
Pre-defined DMX addresses (as shipped from Skulltronix)
|
VSA Address
|
Actual DMX Address
|
Light One Red
|
104 |
105 |
Light One Green
|
105 |
106 |
Light One Blue
|
106 |
107 |
Light Two Red
|
107 |
108 |
Light Two Green
|
108 |
109 |
Light Two Blue
|
109 |
110 |
If you would like different DMX addresses please specify
when ordering or use the Gantom App to change the addresses yourself.
What the Skulltronix LiteKit includes:
- Quantity 2 Precision DMX lights
- Quantity 2 Stereo to DMX male/female cables
- Quantity 1 12 volt power supply
- Quantity 1 One to Two Power splitter
- Quantity 1 DMX Gender Adaptor
Portions of the page above are Copyright 2016 Gantom | 28358 Constellation Road Unit 670, Valencia, CA 91355 | 661-347-0779
|