Order time for animated Skeletrons is 90 days!
The SkeleTron is a full size skeleton designed to compliment our DMX skulls. This isn't a "bucky". It is taller, much better looking and more rugged. The SkeleTron is designed to be seen close up and doesn't have all the ugly wires, screws and other hardware that Buckies have. The SkeleTron IS NOT a medically accurate model of a human skeleton. To improve it's appearance as a prop the bones are much beefier and it actually has more ribs than a real skeleton!
The SkeleTron sits or stands on its own. No need for finding awkward and ugly ways to support it. The standing version has a 40 pound steel plate that it stands on.
Hidden wires! Yes the SkeleTron has a removeable spine cover so that the wires for your SkullTroniX DMX skull can be completely buried inside the bones. The Standing SkeleTron hides wires inside the spine and legs. The sitting version allows the wires to exit at the base of the spine.
The SkeleTron is stained to match your SkullTroniX DMX skull.
The Skull is NOT included at the prices shown. Order you SkullTroniX DMX skull from the link on the left.
Static SkeleTron $899 sitting, $1099 standing
The Static version has poseable arms. The hands can be twisted at the wrist, the arms can be bent at the elbows and the arms can be moved both outward and upward at the shoulder and may be locked into any position. The torso will also turn 180 degrees.
The hands are made of high-quality flexible and unbreakable skinned foam.
SkeleTron - Animatronic Torso $1199 sitting, $1399 standing
The "Torso" version has a high-torque servo mounted in a hidden cavity inside the pelvis. It is controlled from the BOC board in your SkullTroniX skull.
Cautions - The Animatronic versions of the SkeleTron WILL NOT support costumes or hold objects in it's hands. It must be placed in an area where people or things cannot be hit by the arms and hands. That requires at least a 6'x6' area!
SkeleTron - Animatronic Arms, elbows, wrists and torso $4299 sitting, or $4499 standing
This is the full blown animation. Nine powerful servo motors with custom gear drives animate the wrists, elbows and torso plus the arm moves both forward and to the side for a very realistic movement (for a dead guy). This is undoubtedly the most advanced user-programmable animatronic on the market, bar none. It is not only impressive but also a lot of fun to work with. The SkeleTron is controlled by a separate BOC board in the chest and comes withg a 20+amp 7.4 volt power supply and 4 channel DMX dimmer/relay pack. If you order the skull with the skeletron it will come pre-mounted and wired. If you already own a SkullTroniX skull and are ordering the SkeleTron to go with it you need to return your skull to be re-programmed, rewired and mounted.
Please note: the SkeleTron IS NOT available without a SkullTroniX skull unless you already own one or order one with it.
We now offer a "package deal". Buy the fully animated SkeleTron, a SkullTroniX DMX skull, 2 minutes animation programming and our DMX lighting kit and save $900.
Fully Animated SkeleTron with SkullTroniX DMX Skull $5499 sitting, $5699 standing
Included in the package deal are the following:
- Latest version of Brookshire Software's VSA animation package
- Latest version of Brookshire Software's Console program
- Enttec DMX Open interface
- 3 pin to 5 pin DMX adaptor
- DMX cables
- Up to 2 minutes of custom programming (it takes about 6 hours to do 2 minutes) A $600 value
- 27 Amp power supply
- 4 port DMX Dimmer/Relay pack
- SkullTroniX DMX skull pre-mounted and ready to scare.
- SkeleTron - with full arm and torso animation
- DMX lighting kit, consisting of 2 RGB LED stage lights and 2 25 foot DMX cables
You just supply a PC and sound system.